Linear Unit KGT 6 60 P20
0.0.706.00

Linear Unit KGT 6 60 P20

0.0.706.00

View CAD-Data Assign to comparison list Compare products https://kr-product.item24.com/en/directlink/pro/70600
Special features:
item products are based on different modular dimensions and their associated system grooves. Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners. The profiles in Line X feature a Line 8 system groove but have a particularly flat surface with minimum curve radii that make them ideal for building sealed constructions.
All substances are registered according to the REACH regulation. REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that users have accurate information on the type and properties of operating materials, lubricants, etc. that they might come into contact with.

More Product Information

  • Attributes
  • Details
  • Accessories
  • Downloads
  • Deflection calculator
  • Classification
Linear Unit KGT 6 60 P20
0.0.706.00

Attributes

Line
line 6
Delivery unit
1 pce.
Weight
m = 3.253 kg
Weight, spec. Length
m = 4.67 kg/m
ESD
ESD-safe = No
Safety clearance
smin = 26 mm
Stroke max.
Hmax = 2600 mm
Max. speed
Vmax = 1 m/s
Max. acceleration
amax  = 15 m/s2
Repeat accuracy
. = 0.01 mm
Stroke
h = 20 mm/U
Frictional moment
. = 0.2 Nm
Efficiency
η = 90 %
max. drive torque
. = 3.7 Nm
Mass moment of inertia when stroke length = 0 mm
J0 = 30.21 kg mm2
Mass moment of inertia per m of stroke
JH = 43.1 kg mm2/m
Mass moment of inertia per kg of payload
JN = 10.1 kg mm2/kg
Basic mass (when stroke length = 0 mm)
m1 = 3.253 kg
Mass per mm of stroke
m2 = 4.24 g/mm
Total mass
m = m1 + H * m2
Maximum operating load
Fx max = 1000 N
Maximum force in direction y
Fy max = 2000 N
Maximum force in direction z
Fz max = 2000 N
Maximum moment around the x axis
Mx max = 15 Nm
Maximum moment around the y axis
My max = 120 Nm
Maximum moment around the z axis
Mz max = 120 Nm
Support width when Fz max.
.  = 650 mm
Support width when Fy max.
.  = 850 mm
Efficiency
. = 0.9
Moment of Inertia, x-axis
Ix = 28.09 cm4
Moment of Inertia, y-axis
Iy = 43.46 cm4
Resistance Moment, x-axis
Wx = 8.19 cm3
Resistance Moment, y-axis
Wy = 14.44 cm3
Linear Unit KGT 6 60 P20
0.0.706.00

Details

Overall length = L
Stroke = H
Safety clearance = S
The distances S1 and S2 are built as follows:
S1: distance to the fixed bearing (13mm) + safety distance (Smin = 26mm) + n x spindle support (16mm)
S2: distance to floating bearing (11mm) + safety distance (Smin = 26mm) + n x spindle support (16mm)
The safety distance of 26mm is in all variants the free area, in which e.g. during the reference motion procedure is driven.
Compact, precise and dynamic! Linear Unit KGT 6 60 P20 combines a ball screw drive that has a stroke of up to 2600 mm with a strong carriage, and does so in the smallest of installation spaces.
In applications with a long travel distance, travelling spindle supports keep everything running smoothly and precisely without sacrificing dynamics. Radial stabilisers on the inside of the axis provide perfect support for the specially shaped spindle regardless of the stroke length and carriage position.
Thanks to its installation dimensions of just 60x60 mm and two Line 6 groves on its side flanks, Linear Unit KGT 6 60 is very easy to integrate into constructions. Featuring a spindle lead of 20 mm per revolution, the system can reach a speed of up to 1 m/s, even at maximum stroke. Acceleration is up to 15 m/s2.
The carriage runs on two recirculating ball units that exhibit minimal reversal play during a change of direction. This enables reliable positioning with a repeatability of 0.01 mm at a high feed force of up to 1000 N. The powerful ball screw unit is thus ideal as a single axis for moving tools and workpieces with absolute precision. When combined with additional KGT 6 60 units and other item Linear Units, the spindle axis can be used to build precise and strong 2D and 3D gantries.
An unbroken cover strip conceals the inner workings and therefore provides protection from soiling. The spindle is low-maintenance and features lifetime lubrication.
These plug-and-play solutions can be connected to item Motors in 40 mm and 60 mm sizes without the need for additional machining. Drive Set KGT 6 60 universal is available for use with other drives.
The whole selection and design process can be completed in next to no time when using item MotionDesigner®. The software maps out the entire system to suit your transport task. The Linear Unit is supplied as a ready-to-install solution in a custom length.
――――――  with support
--------------  without support
D = Speed  [1/min]
 L = Length of shaft [mm]

 

Maximum spindle speed with and without KGT 6 60 P 20 spindle supports
The spindle supports keep the maximum unsupported spindle length more or less constant. This means the critical speed of 3000 min-1 is constant over the entire possible stroke range.
Linear Unit KGT 6 60 P20
0.0.706.00

Accessoires / Service

Drive Set 6 60 D30/D12 SE 40
Delivery unit
1 set
Article-No.
0.0.692.53
Drive Set 6 60 D30/D12 SE 60
Delivery unit
1 set
Article-No.
0.0.692.55
Proximity Switch KLE 6 60x60 - 1NO
Delivery unit
1 pce.
Article-No.
0.0.609.31
Available soon
Drive Set 6 60 D30/D12
Delivery unit
1 set
Article-No.
0.0.704.53
Proximity Switch KLE 6 60x60 - 1NC
Delivery unit
1 pce.
Article-No.
0.0.604.41
item MotionSoft®
Delivery unit
Article-No.
0.0.675.15
item MotionDesigner®
Delivery unit
Article-No.
0.0.677.79
Transverse Carriage Plate 6 60 190x119
Delivery unit
1 set
Article-No.
0.0.708.75
Profile Fastening Set 6/8 80x60
Delivery unit
1 set
Article-No.
0.0.708.20
Parallel Drive Set 6 60 D12-1 SE 60
Delivery unit
1 set
Article-No.
0.0.708.27
Hand-Wheel D60 D12
Delivery unit
1 set
Article-No.
0.0.714.12
Parallel Drive Set 6 60 D12-1
Delivery unit
1 set
Article-No.
0.0.708.42
Drive Set 6 60 D30/D12 NEMA 24
Delivery unit
1 set
Article-No.
0.0.713.17

Downloads

Assembly instruction(7 MB)

Deflection calculator

To determine the profile deflection around the Y-axis, please enter

The calculation already takes the deflection caused by the dead weight into account.

Load 1

load 1
Deflection f1x: 0 mm Bending stress σ1x: 0 N/mm² Warning! The bending stress exceeds the yield strength of the material.
Deflection f1y: 0 mm Bending stress σ1y: 0 N/mm² Warning! The bending stress exceeds the yield strength of the material.

Load 2

load 2
Deflection f2x: 0 mm Bending stress σ2x: 0 N/mm² Warning! The bending stress exceeds the yield strength of the material.
Deflection f2y incidental: 0 mm Bending stress σ2y: 0 N/mm² Warning! The bending stress exceeds the yield strength of the material.

Load 3

load 3
Deflection f3x: 0 mm Bending stress σ3x: 0 N/mm² Warning! The bending stress exceeds the yield strength of the material.
Deflection f3y incidental: 0 mm Bending stress σ3y: 0 N/mm² Warning! The bending stress exceeds the yield strength of the material.
Linear Unit KGT 6 60 P20
0.0.706.00

Classifications

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 11.0
23301702
eCl@ss 4.0
36400806
eCl@ss 4.1
36400701
eCl@ss 5.0
23329090
eCl@ss 5.1
23329090
eCl@ss 6.0.1
23301702
eCl@ss 7.1
23301702
eCl@ss 8.0
23301702
UNSPSC 7.0
26111506
UNSPSC 9.0
26111506
customs tariff number
84879090